IR Device Controller (Work with IR Eye)  PLC-R 3012E

Through IR Emitter, e.g. Marmitek IR Eye, and work with any kinds of IR Devices:
IR Devices Controller (#3012E) can be compatible with any X10 controllers. You can control IR Devices by any X10 controller in your home.

Technical Spec:
Rating Voltage: 230V/50Hz
Static State Wastage: < 1W
IR Transmit Distance: Up to 3 meter IR emitter cable
IR Learning Distance : <5cm
IR emitter jack plug : 3.5mm
IR Signal Limitation : 38KHz , command length less than 250ms

Main Features:
1). Work with IR emitter, this configuration gives you the highest level of signal transmission accuracy
2). Totally 16 addresses, and 32 IR commands;
3). Setup in 4 groups, each group for 4 X10 address
4). 2 IR Commands are for each address;
5). Address 1 and 2, when last operation is successful, feedback to #4034E is ON status;
6). Will not responds to “All Lights On/All Units Off” Command.